Equipped with the dual tool holders with a creasing tool and blade, the RX II creasing model offers card stock creasing and cutting to make a small volume of a paper box. PS. It’s suggested that the card stock weight range is 200 to 350 gsm, and the weight will vary with the type and thickness of the paper.
Equipped with a special dual holder – blade holder and creasing tool holder - on the carriage, creasing lines and cut lines can be made at one time. It saves to valuable time.
The Multi-Pressure Pinch Rollers give users three pressure settings to better cater to the different types of media that they are working with the following shows suitable settings for some materials.
Equipped with the dual tool holders with creasing tool and blade, RX II creasing model offers card stock creasing and cutting to make small volume of paper box. PS.
Equipped with special dual holder – blade holder and creasing tool holder - on the carriage, creasing lines and cut lines can be made at one time. It saves your valuable time.
RX II series supports triple port connectivity with USB, serial and Ethernet ports.
This features allows users to set the cutter to cut off the media after the completion of each job, making it easy to set up an unattended workflow for mass production.
The brand new touch key panel is easy to use and durable. The intuitive design allows new users to operate the machine easily.
At up to 60 inches per second of cutting speed, RX II series cutting throughput simply outperforms the competition.
Selectable cutting forces, ranging from 5 to 600g, accommodate a wide variety of materials, including fine and thin masking films to thick and hard reflective films.
The tangential mode performs clean cuttings, diminutive letterings and intricate graphics which yield smooth corners and sleek edges on thick materials.
This handy and innovative design allows you to cut off a finished job in a straight line easily, reducing the possibility of wasting usable material.
This handy and innovative design allows you to cut off a finished job in a straight line easily, reducing the possibility of wasting usable material.
Meet the experts and solve your most challenging jobs. Experience a live one-on-one demo tailored for you with our Application Engineers.
RX II-61(Creasing) \ RX II-61 \ RX II-101S \ RX II-132S \ RX II-183S
Max. Cutting Width
536mm(21”) \ 610mm(24”) \ 1010mm(40”) \ 1320mm(52”) \ 1830mm(72”)
Max. Media Loading Width
642mm(25.28”) \ 810mm(31.88”) \ 1326mm(52.2”)
1635mm(64.37”) \ 2145mm(84.44”)
Net Weight
25.5kg(56.22 lb) \ 25kg(55.12 lb) \ 61.8kg(136.2 lb)
71.5kg(157.6 lb) \ 82kg(180.8 lb)
Max. Cut Off Width
642mm \ 696mm \ 1107mm \ 1417mm \ 1927mm
Operational Method
Roller-Type
Max. Cutting Length
50m (164ft)
Min. Media Loading Width
50mm (1.97in)
Acceptable Material Thickness
0.8mm (0.03in)
Drive Motor
DC Servo Control
Max. Cutting Force
600 g
Max. Cutting Speed
1530 mm/sec (60 ips) (at 45° direction)
Acceleration
4.2 G (gravity)
Offset
0~1.0 mm (with an increase of 0.025mm)
Memory Buffer
32 MB /16 MB (when using AAS)
Interfaces
USB 2.0 (Full Speed), Serial (RS-232) and Ethernet
Type of Command
HP-GL, HP-GL/2
Mechanical Resolution
0.006 mm
Software Resolution
0.025 mm
Distance Accuracy
±0.254 mm or ±0.1% of move, whichever is greater
Repeatability
±0.1mm
Automatic-Aligning System
Completely Automatic Contour Cutting System for print to cut solution
Auto Rotation
Yes
Section Cutting
Yes
Curve & Arc Smoothing
Yes
Configurable Origin
Yes
Test Cut Capability
Yes
Tangential Mode
Yes
Over Cut
Yes
Repeat
Yes
Copy
Yes
Control Panel
LCD (20 digits x 2 lines), 15 Keys, 1 Power LED, 1 Green LED
Diameter of Blade
2.5 mm
Power Supply
100 ~ 240VAC 50/60Hz (auto switching)
Power Consumption
Max. 250 W
Operation Environment
Temperature 15°C~30°C / 60°F~86°F
Humidity 25% ~ 75%